Proper care and maintenance of your microscope can extend its life by many years.
- Tip 1: Handle with care.
- Tip 2: Keep lenses clear of slides.
- Tip3: Clean after using immersion oil.
- Tip 4: Cover when not in use.
- Tip 5: Look after the bulb.
- Tip 6: Store in a clean, dry place.
Accordingly, why do you have to handle and care of the microscope properly?
Lens and Objective Care – Microscope lenses are very fragile and need to be handled with care to prevent scratches. Never let your lens touch the microscope slide and never touch any of the lens with your fingers. Microscope lenses are difficult to clean and proper care is very important.
Likewise, what to do after using microscope? ALWAYS clean the microscope when you are done. Use a Kimwipe or lens paper and the alcohol in the labeled jars. 8. Always place the 4X objective over the stage and be sure the stage is at its lowest position before putting the microscope away.
Accordingly, how long will a microscope last if I take good care of it?
What are the do's and don'ts of using a compound microscope?
Microscope Dos & Don'ts
- Keep the top eyepiece lens and bottom lens protectors clean with an alcohol/water/soap solution and a cotton tipped applicator.
- Do not put masking tape or rubber bands on or around the eyepieces.
- Do not put tape, stickers, labels on microscopes except for quality and company identification purposes only.
What should you always remember when handling microscope slides?
Questioners. Explain an important thing to remember as you turn the high power objective into place. An important thing to remember as you turn the high power objective into place , it is retractable, when you hit a slide, the end of the lens will push in (spring loaded) thereby protecting the lend and the lens.What is the proper way to carry a microscope?
When moving your microscope, always carry it with both hands (Figure 1, at left). Grasp the arm with one hand and place the other hand under the base for support. Turn the revolving nosepiece so that the lowest power objective lens is "clicked" into position (This is also the shortest objective lens).What is the purpose of the coverslip?
This smaller sheet of glass, called a cover slip or cover glass, is usually between 18 and 25 mm on a side. The cover glass serves two purposes: (1) it protects the microscope's objective lens from contacting the specimen, and (2) it creates an even thickness (in wet mounts) for viewing.How do you keep a microscope in good condition?
Take a look at our top tips to keep your laboratory microscopes in tip top condition.- Handle with care. Improper handling is a common cause of many problems that occur with microscopes.
- Look after lenses.
- Keep covered.
- Store safely.
- Keep clean.
- Take care of bulbs.
- Clean carefully.
- Refer to the user's manual.
What is total magnification?
Total magnification is when the object being viewed is magnified to its maximum limit.What is simple microscope?
Simple Microscope Definition. A simple microscope is one that uses a single lens for magnification, such as a magnifying glass while a compound microscope uses several lenses to enhance the magnification of an object.Why should you never touch microscope lenses with your fingers?
Never touch the eyepiece or objective lens with your fingers because the oil on your skin will soil the lens. Dust is an enemy to your lenses, hence when finished; the microscope must be covered with a plastic cover again to keep out dust.What must you do without fail before storing your microscope?
Do not store a microscope without any eyepieces, even if it is covered. This can allow dust to collect within the eye tubes, which can be difficult to clean. If the microscope eyepieces must be removed, simply cover the tubes with caps or a plastic bag with a rubber band around the eye tube.Why do specimens have to be thin?
A specimen has to be thin so that the light coming from the light source is able to pass through the specimen Specimens are sometimes stained with dyes so that they are easier to distinguish and find.What power objective should your microscope be stored at?
THE MICROSCOPE SHOULD BE STORED WITH THE (OIL IMMERSION) LENS IN POSITION OVER THE STAGE. "EYEPIECES" ARE LOCATED ON TOP OF THE BODY TUBE AND USUALLY HAVE A MAGNIFICATION POWER OF 10X. WHEN BEGINNING TO FOCUS, USE THE (LOWEST-POWER) LENS. WHEN FOCUSING, ALWAYS FOCUS (TOWARD) THE SPECIMEN.How do you not use a microscope?
Your microscope slide should be prepared with a coverslip over the sample to protect the objective lenses if they touch the slide.- Do not touch the glass part of the lenses with your fingers.
- Always keep your microscope covered when not in use.
- Always carry a microscope with both hands.
How do you clean a microscope?
Place one eye dropper full of household ammonia in 1/2 cup of water. If you have any sticky substances on your objectives such as balsam, oily materials or paraffin, this should be removed with xylol. To clean microscope eyepiece lenses, breathe condensation onto them and then wipe them with lens tissue.What steps are necessary when cleaning the microscope and preparing it for storage?
Terms in this set (7)- Put the low power objective into place.
- Lower the stage.
- Take the slide off the stage.
- Turn the microscope off.
- Wrap the cord.
- Cover and push the microscope to the back of the lab bench (to a safe location)
- Clean lab station.
