Rotate the spool clockwise to wind the line on the spool until approx. 6 in. of line is showing on each side. Push the spool retainer down while pulling on line(s) to manually advance line and to check for proper assembly of the on the string head.
Beside this, how do you bump feed a trimmer?
When you press the head of your trimmer against a flat surface, it squeezes a spring in the head of the string trimmer. This action releases string from the spool so you have a line with which you can cut down debris. The bump feed electric trimmer uses centrifugal force to pull the string from the spool.
Additionally, how do I remove the line from my Ryobi trimmer?
- Turn off the Ryobi trimmer.
- Hold the spool of line in one hand and rotate the bump knob counterclockwise.
- Remove the knob.
- Let the trimmer come to a complete stop.
- Locate the two opposite tabs on the sides of the spool retainer.
- Pull up on the old spool to remove it.
Also know, how do I change the attachment on my Ryobi?
- Stop the engine and disconnect the spark plug (if a gas unit), remove the battery (if using RYOBI 40V Power Head)
- Loosen the knob at the connection point.
- Push in the button and twist the shafts to remove and separate the Power Head from the Attachment.
