How do you measure a firebox?

To measure your firebox for the gas log set measure the rear width, front width and depth of the firebox. The front width should have 2-6" of space on each side of the gas log set.

Furthermore, how do you measure the size of a fireplace?

How to Measure Your Fireplace for Gas Logs

  1. Measure the front opening of your fireplace.
  2. Measure the back width of your fireplace.
  3. Measure the depth of the floor from back wall to the front of your fireplace.
  4. Measure the inside height of the fireplace from the floor to the lowest point inside the fireplace.

Also, what is the depth of a fireplace?

Fireplace Opening Width 24" 54"
Fireplace Opening Height 24" 37"
Firebox Depth* See Note Below 16" 20"
Rear Firebox Width 11" 37"
Rear Firebox Vertical Height 14" 16"

Similarly, what is the standard size of a fireplace?

Size of Room Fireplace Opening in Feet in inches 14 x 28 40 to 48 16 x 30 48 to 60 20 x 26 48 to 72 Page 2 the Rumford Fireplace. The Standard Fireplace (see p. 4-5) has a short firebox with the back wall leaning forward.

What should I look for when buying a fireplace insert?

When purchasing a fireplace insert, look beyond appearance. Be sure to get one that is properly sized for your needs. It is important to get one that will fit the size of your fireplace and produce the right amount of heat. Measure the depth, width, and height of your fireplace so you'll know a given insert will fit.

How do I choose a fireplace insert?

Step one in choosing the right fireplace insert is getting the right size. Modern inserts come in a variety of shapes and sizes, and with a little investigating, you'll find the perfect one for your fireplace. When measuring the opening of your fireplace, measure from side to side and from top to bottom.

How big should my firebox be?

Rule of thumb. Firebox size should be 1/3 the volume of the cook chamber.

How thick is a mantle?

The mantle is the mostly-solid bulk of Earth's interior. The mantle lies between Earth's dense, super-heated core and its thin outer layer, the crust. The mantle is about 2,900 kilometers (1,802 miles) thick, and makes up a whopping 84% of Earth's total volume.

What is the standard width of a fireplace hearth?

Standard Dimensions Standard hearth pad dimensions vary based on the width of the fireplace. When building standard models, make sure hearth pads extend at least 16 inches beyond the fireplace's front edge. Also, ensure the hearth pad stretches at least 8 inches past the right and left edges of the fireplace.

How thick is a fireplace wall?

1. Chimney wall thickness should be a nominal 4 in. (100 mm) unless no flue liner is used, in which case a nominal 8 in. (200 mm) is required.

What is a standard mantel depth?

A depth of 7 inches is ideal for most mantels, as it allows plenty of room to accommodate decorative objects. Keep in mind that the top and the sides of the mantel should be the same depth.

How many square feet is a standard fireplace?

Novus
Model BTUs Space it will Heat
Heirloom 36 27,000 – 45,000 1,100 – 1,800 square feet
Heirloom 42 30,000 – 54,000 1,500 – 2,500 square feet
Heirloom 50 36,000 – 65,000 1,900 – 3,000 square feet

How are fireplaces measured?

Measure from the top of the firebox or the top of the lintel (whichever is highest) to the bottom of the fireplace face. If the lintel is a different height than the fireplace face, also record the height to the lintel. If your fireplace has an arched opening, also record the largest height measured.

What is code for fireplace surround?

The National Fire Code dictates that any combustible material (e.g., wood mantel or similar trim) must be at least six inches from the firebox opening. An additional inch of clearance is needed for every 1/8 inch the combustible material or trim protrudes.

What are the different types of fireplaces?

There are four types of fireplaces: Wood-burning, gas-burning, electric and ethanol-burning fireplace.

How is a fireplace constructed?

Fireplaces come in two general types: masonry fireplaces and factory built (prefab) fireplaces. A masonry fireplace has a firebox built of individual generally yellowish firebrick, a brick chimney above the roof, and if you look up past the damper you will see a roughly pyramid shaped affair also built of brick.

Can a fire be too big in a fireplace?

Don't build a fire too big for the fireplace. Don't use fire starters such as charcoal lighter, kerosene or gasoline to start the fire. Fireplaces radiate heat just like space heaters so furniture and other combustibles should be kept a safe distance from the fire. Be sure the chimney is clean and in good condition.

You Might Also Like