- Stop the engine, wait 5 minutes for parts to cool down, disconnect the spark plug wire on the engine and move it well away from the plug.
- Check the cutting line holder for any damage.
- Insert one end of a 23-inch length of cutting line into one of the smaller holes on the cutting line installation point.
Also to know is, what kind of oil does a DR Trimmer take?
You will need approximately 20 ounces of SAE 30 high detergent oil. Use only SAE 30 high detergent oil classified "For Service SF, SG, SH, SJ" or higher. You will need to use an Oil Extractor Pump or tip the Trimmer over and drain the oil out the fill tube. The Trimmer should be on level ground when adding the oil.
Subsequently, question is, where is the model number on a Dr trimmer? A Serial Number is used to identify your machine and is located on the Serial Number Label on your machine. An Order Number is used to check and maintain your order history and is located on the upper left portion of your packing slip.
Beside above, what size belt does a DR Trimmer take?
Belt measures 5/8" x 58".
