The general rule is that there should be a two to three-inch base of sand under an above ground pool. If you know the dimensions of your pool area, then you can easily figure out how much sand you'll need for the base using a sand calculator.
Hereof, how much sand do I need for under my pool?
Type and Volume An average 18-foot round aboveground swimming pool requires about 3 tons or 2.5 cubic yards of sand to provide a 2-inch base. The cost for a cubic yard of masonry sand varies, but $48 is about average.
Furthermore, how much sand do I need for a 30 foot pool? Masonry Sand Volume Chart for Above Ground Pool Installations
| Pool Size | Tons | Yards |
|---|---|---|
| 30' Round | 7.5 | 5 |
| 12' x 24' Oval | 4 | 2.5 |
| 15' x 24' Oval | 4.5 | 2.5 |
| 15' x 30' Oval | 5 | 3 |
Likewise, people ask, do I have to put sand under my pool?
Mostly it is to provide a smooth level base under the liner of an above ground pool. While it works, it is not the best option. The sand would act as a barrier that would take in any water or moisture as opposed to all of that liquid going into the soil underneath the pool, potentially not killing your grass.
How much sand do I need for a 14 foot pool?
| Amount for Sand Base with SAND COVE | Amount for Sand Base with FOAM COVE | |
|---|---|---|
| 14' X 20' Oval | 2.00 | 1.5 |
| 15' X 23' Oval | 2.50 | 1.75 |
| 15' X 24' Oval | 2.50 | 1.75 |
| 15' X 26' Oval | 2.75 | 2.00 |
What kind of sand should I use under my pool?
Mason sand, sometimes called mortar sand, can normally be found at any sand/gravel yard or masonry supply yard. It is usually measured in yards. It is very fine and should not contain any rocks or pebbles. This will create a very smooth bottom and is the most popular method to use when installing an above ground pool.Can I use play sand under my pool?
The correct name for the sand to use under an above ground pool is washed mortar sand. This is very similar to masonry sand, sometimes it's the same and sometimes a little less course, which is good. The bags of play sand sold at Home Depot have to fine of sand, to much dust and to many rocks.How much area will a 50 lb bag of sand cover?
For 2 inches of sand: 128 divided by 1/6 (2/12)=21.3 cubic feet or about ¾ cubic yard. A 50 pound bag of sand is about 3 cubic feet…so it looks like 7-8 bags should work for 2 inch depth.Can you level a pool with sand?
Use the long 2x4 with a level on top of it to approximately level out your sand. If there is a void, shovel on some more sand. If there is a great excess, rake the sand off to the side. In a fairly short time, you will have a perfectly leveled out swimming pool area!Can you put sand under a Intex pool?
I use a little sand under Intex pools, to cushion the bottom, but not for leveling. You can then just use a ground cloth over the dirt or you could cover the area with an inch or so of sand. A twenty four foot pool would probably use about 3 tons of sand.How do you prepare the ground for an above ground pool?
Yard Preparation- Step 1: Placement. The first step is deciding where you want to place the swimming pool in the backyard.
- Step 2: Clean the Area. Remove all items that could make it difficult to secure a proper foundation for the pool.
- Step 3: Measure.
- Step 4: Start Digging.
- Step 5: Level the Pool Hole.
- Step 6: Wait 24 hours.
What can I use instead of sand under my pool?
You could go with a thin layer of sand. Smooth it out, wet it down and pack it down good. Over top of that you could use carpet foam, carpet felt, indoor/outdoor carpet, something along those lines that can be found in the remnants, cutoffs or discount racks of carpet stores.Can you put a pool on grass?
Installing an above-ground pool on a natural grass lawn is not a good idea, particularly if you plan on taking down the pool for part of the year. Since natural grass does get muddy and can be quite slippery when wet, there are also issues around safety and, of course, tracking mud and wet grass into the house.Can I put a tarp under my pool?
It's OK to use a tarp under the sand but not in place of it. A tarp will allow all the lumps and bumps of a dirt base to show through into the base of your pool. The sand will smooth out making the bottom of your pool easier to clean and easier on the feet for walking on. The sand can also be used in the cove area.What do I put under my above ground pool for grass?
Concrete Pads It is a good pad for the above ground pool on grass because it is flat and level. It will keep the pool in place, and it would not shift around. But don't forget that concrete is a pretty rough surface, and in the long run, it might damage the pool liner.Why do you put sand under a pool?
The sand acts as a barrier between the ground and the liner and helps to protect the liner from any rocks, roots or other hard objects. It also provides cushioning for the floor of the pool, making it more comfortable underfoot.How do you calculate how much sand I need?
To determine how much sand, topsoil or stone you need to fill an area:- Measure number of square feet in the area.
- # of square feet x depth in feet = # of cubic feet.
- # of cubic feet /divided by 27 = # of cubic yards.
- # of cubic yards x (unit weight in pounds / 2000) = # of tons needed.
