Where are the fuses on a Bad Boy mower?

On most larger commercial engines (27 hp and up), the 25 amp main fuse is located about 3” from the starter on the engine. (shown in first image on right). On smaller commercial and light duty commercial mowers, the 25 amp main fuse is located just behind the battery connected to the starter solenoid.

Consequently, where are the grease fittings on a Bad Boy mower?

Grease at every engine oil change. The deck belt tensioner is located at the rear of the deck and has a grease fitting on its pivot point. Grease at every engine oil change.

Subsequently, question is, how Much Do Bad Boy mowers weigh? Dimensions. 5400 - 1,270 lbs. 6100 - 1,325 lbs. 7200 - 1,375 lbs.

Keeping this in consideration, how do you turn on a Bad Boy lawn mower?

7.1 Ignition Switch—Bad Boy Mowers have a three position ignition switch: off, run, and start. With key inserted, rotate it clockwise to START position and release key when engine starts, and switch will automatically return to he RUN position.

How do you adjust the deck on a Bad Boy mower?

RAISE THE DECK UP, AND MEASURE ALL FOUR CORNERS OF THE DECK TO SEE IF IT IS LEVEL FROM LEFT TO RIGHT AND FRONT TO BACK. ALL DECKS SHOULD BE LEVEL FROM LEFT TO RIGHT AND HAVE A ¼” PITCH DOWN IN THE FRONT. IF DECK ADJUSTMENTS ARE NECESSARY, START WITH THE CHAIN LENGTH ADJUSTERS.

How do I lubricate my lawnmower?

Press the grease gun coupler onto the zerk fitting and gently press the handle to begin the grease flow. When greasing your lawn mower, park the machine on a solid and flat service, such as the driveway. Turn off the ignition and permit the mower to cool down for about ten minutes.

What year is my Bad Boy mower?

Search By Serial Number The Bad Boy mower serial number sequence for models 2004 and newer is either a seventeen or eighteen digit sequence beginning with the letter "B". For units older than 2004 you could have 16 digits.